India Threadlocker Adhesives Market Size & Growth Rate
According to 6Wresearch internal database and industry insights, the India Threadlocker Adhesives Market was valued at USD 606.0 million in 2025 and is projected to reach USD 979.49 million by 2032, growing at a CAGR of approximately 7.1% during 2026–2032.
India Threadlocker Adhesives Market Highlights
| Report Metric | Details |
| Report Name | India Threadlocker Adhesives Market |
| Market Size 2025 | USD 606.0 million |
| Market Size 2032 | USD 979.49 million |
| Absolute Growth 2025–2032 | USD 373.49 million |
| CAGR 2026–2032 | 7.1% |
| Peak Annual Growth | 8.9% in 2032 |
| Forecast Period | 2026–2032 |
| Historical Data | 2022–2025 |
| Base Year | 2025 |
| Leading Adhesive Strength, 2025 | Low Strength (40% share) |
| Leading Curing Method, 2025 | Anaerobic (36% share) |
| Leading Thread Size Suitability, 2025 | Small Screws (40% share) |
| Leading End User, 2025 | Electronics Industry (37% share) |
| Fastest-Growing Adhesive Strength | Medium Strength (8.2% CAGR) |
| Fastest-Growing Curing Method | Heat-Resistant (8.3% CAGR) |
| Fastest-Growing Thread Size Suitability | General Assembly (9.6% CAGR) |
| Fastest-Growing End User | Automotive Assemblers (8.4% CAGR) |
| Growing Sector | Automotive Assemblers |
| Key End Users | Electronics Industry, Automotive Assemblers, Industrial Equipment Makers, Maintenance Services |
India Threadlocker Adhesives Market Year-wise Growth Rate and Key Drivers (2022–2032)
This graph illustrates the annual growth rates of the market from 2022 to 2032, highlighting a steady upward trajectory and projected market expansion over the forecast period.
The following table presents the estimated annual growth rate for each year together with the principal factor influencing market performance.
| Year | Estimated Annual Growth (%) | Market Rationale |
| 2022 | 8.4 | The market showed strong demand due to the automotive sector's recovery and production increases. |
| 2023 | 6.7 | Growth slowed as manufacturers adjusted to supply chain challenges and inflationary pressures. |
| 2024 | 4.3 | Demand continued to slow as the market stabilised after previous highs in production. |
| 2025 | 5.8 | A resurgence in automotive production boosted adhesive requirements, leading to faster growth. |
| 2026 | 5.6 | Growth slowed again as the market faced saturation in certain applications. |
| 2027 | 8.6 | Increased automotive production and maintenance activities drove higher demand for adhesives. |
| 2028 | 5.3 | Growth decelerated as the market adjusted to new manufacturing standards and practices. |
| 2029 | 7.0 | A rise in electronic device production spurred demand for threadlocker adhesives. |
| 2030 | 7.5 | Continued expansion in automotive and electronics sectors supported adhesive usage growth. |
| 2031 | 6.8 | Growth moderated as market conditions stabilised and competition intensified. |
| 2032 | 8.9 | The market is expected to peak as automotive production and maintenance needs rise. |
Note: Market size estimations and growth projections presented in this report are based on 6Wresearch's proprietary forecasting methodology, utilizing the latest available industry data, government publications, and primary research inputs.
India Threadlocker Adhesives Market Synopsis
Threadlocker Adhesives Market in India covers anaerobic adhesives that secure threaded fasteners, preventing loosening and sealing against leakage. These adhesives are primarily used in automotive and industrial applications. The India Threadlocker Adhesives Market is growing due to strong demand from the automotive sector, which contributes 7.1% to the GDP. Additionally, the electronics industry is projected to reach $300 billion by 2026, further increasing adhesive requirements.
Market Dynamics Impact Analysis (2026–2032)
| Factor | Type | Impact | Primary Segment Affected |
| Rising automotive production and maintenance activities drive demand for adhesives. | Driver | High | Automotive Assemblers |
| Increasing electronics manufacturing enhances the need for securing components. | Driver | High | Electronics Industry |
| Investment in local manufacturing creates opportunities for adhesive suppliers. | Opportunity | High | Industrial Equipment Makers |
| Growing automotive aftermarket presents a chance for adhesive sales. | Opportunity | Medium | Maintenance Services |
| Competition from alternative fastening solutions may limit adhesive adoption. | Restraint | Medium | General Assembly |
| High production costs can deter small manufacturers from using adhesives. | Restraint | High | Heavy Machinery Bolts |
| Supply chain disruptions affect timely delivery of adhesive products to buyers. | Challenge | High | Automotive Assemblers |
| Fluctuating raw material prices create uncertainty for adhesive producers. | Challenge | Medium | Electronics Industry |
Evaluation of Drivers in India Threadlocker Adhesives Market (2026–2032)
Key forces behind demand, with the segment each one moves most, are listed below.
| Drivers | Primary Segment Affected | Why It Matters (Evidence) |
| Strong automotive production growth increases adhesive usage. | Automotive Assemblers | The automotive sector produced 22.7 million vehicles in 2021, necessitating adhesive solutions. |
| Rising electronic device assembly drives demand for adhesives. | Electronics Industry | The electronics industry is projected to reach $300 billion by 2026, increasing adhesive requirements. |
| Government initiatives support local manufacturing of adhesives. | Industrial Equipment Makers | The 'Make in India' initiative promotes domestic manufacturing, boosting demand for industrial adhesives. |
| Increased maintenance services boost adhesive sales. | Maintenance Services | The automotive aftermarket is expected to grow to $18 billion by 2026, increasing demand for maintenance adhesives. |
| Updated standards ensure quality and safety of adhesive products. | General Assembly | The Bureau of Indian Standards (BIS) updated standards for adhesives in 2021, ensuring quality and safety. |
The automotive sector produced 22.7 million vehicles in 2021, resulting in a marked increase in adhesive usage. The electronics industry is anticipated to reach $300 billion by 2026, boosting demand for securing components. The automotive aftermarket is projected to grow to $18 billion by 2026, presenting new opportunities for adhesive suppliers.
Evaluation of Restraints in India Threadlocker Adhesives Market
The key brakes on demand, and where they bite hardest, are shown below.
| Market Restraint | Primary Segment Affected | Why It Matters (Evidence) |
| Competition from alternative fastening solutions may limit adhesive adoption. | General Assembly | Alternative fastening methods are often preferred for their ease of use, affecting adhesive sales. |
| High production costs can deter small manufacturers from using adhesives. | Heavy Machinery Bolts | Rising costs of raw materials impact the affordability of adhesive solutions for smaller manufacturers. |
| Supply chain disruptions affect timely delivery of adhesive products to buyers. | Automotive Assemblers | Delays in raw material supply can hinder production schedules for automotive manufacturers. |
| Fluctuating raw material prices create uncertainty for adhesive producers. | Electronics Industry | Volatility in prices affects budgeting and planning for adhesive manufacturers. |
| Limited awareness of adhesive benefits among smaller manufacturers. | General Assembly | Smaller manufacturers may not fully understand the advantages of using threadlockers. |
India Threadlocker Adhesives Market Challenges
Buyers and suppliers in the India threadlocker adhesives market face regulatory hurdles, as the Bureau of Indian Standards mandates stringent quality standards that can delay product approvals for manufacturers, impacting supply timelines for automotive and industrial buyers. Rising production costs present another challenge; the automotive sector's growth drives demand for adhesives, causing raw material prices to increase by up to 15%, directly raising costs for suppliers. Technological constraints hinder innovation in adhesive formulations, limiting suppliers' ability to meet evolving market needs, which can lead to a 20% loss in competitive advantage. Skills shortages in the workforce impede effective application of threadlockers, resulting in potential failures in over 30% of industrial machinery applications, affecting reliability for end users.
Trends in the India Threadlocker Adhesives Market
Below mentioned are some of the trends shaping the India Threadlocker Adhesives Market growth.
- Shift in Automotive Assembly Practices: Automotive assemblers are increasingly adopting threadlocker adhesives to improve assembly efficiency and reliability. In 2021, over 90% of automotive components required adhesives, reflecting a trend towards secure fastening.
- Transition to Advanced Electronics Manufacturing: The electronics industry is moving towards more sophisticated assembly techniques, necessitating high-performance threadlockers. By 2026, the electronics market is projected to reach $300 billion, driving demand for advanced adhesive solutions.
- Emergence of Eco-Friendly Adhesives: Manufacturers are prioritising eco-friendly threadlocker formulations in response to environmental regulations. The Bureau of Indian Standards updated adhesive standards in 2021 to include sustainability criteria, influencing market offerings.
- Increased Focus on Quality Standards: The adoption of stringent quality standards is reshaping adhesive production processes. The BIS established new adhesive standards in 2021, ensuring higher quality and safety for end-users.
Investment Opportunities in the India Threadlocker Adhesives Market
The following opportunities in the India Threadlocker Adhesives Market pair current demand with a clear way in.
- Local Partnerships for Manufacturing: Investing in local partnerships for adhesive manufacturing is timely, especially with the 'Make in India' initiative encouraging domestic production. This initiative aims to strengthen local manufacturing capabilities.
- Supply of High-Performance Adhesives: With the automotive sector anticipated to grow at a rate of 10% from 2023 to 2028, there is a strong opportunity to supply high-performance threadlockers. Targeting automotive assemblers can yield substantial returns.
- Investment in Eco-Friendly Products: Investing in eco-friendly threadlocker formulations is timely, given increasing regulatory pressures. Suppliers can focus on the electronics industry, which is rapidly expanding and requires sustainable solutions.
- Expansion into the Automotive Aftermarket: The automotive aftermarket is projected to grow to $18 billion by 2026, presenting an opportunity for adhesive suppliers. Concentrating on maintenance services can improve market penetration.
Government Initiatives in the India Threadlocker Adhesives Market
The 'Production Linked Incentive Scheme' launched by the Ministry of Electronics and Information Technology in 2020 incentivises local manufacturing, targeting a $300 billion electronics market by 2026. This measure encourages adhesive producers to enhance their offerings to meet rising demand. The 'National Policy on Electronics 2019' aims to boost domestic manufacturing and reduce imports, increasing the demand for adhesives in the electronics sector.
The Bureau of Indian Standards (BIS) oversees the approval of adhesive standards, ensuring quality and safety across industries. In 2021, BIS updated these standards, impacting how adhesives are produced and marketed, thereby benefiting both producers and buyers. The 'National Automotive Testing and R&D Infrastructure Project' supports automotive innovation, influencing adhesive applications in vehicle manufacturing.
Future Insight of the India Threadlocker Adhesives Market
The India threadlocker adhesives market will undergo significant changes by 2032, driven by the 'Make in India' initiative that will enhance local manufacturing capabilities. The automotive sector's growth, projected at 10% from 2023 to 2028, will increase adhesive demand, particularly in vehicle assembly where threadlockers are essential. Enhanced standards like ISO 10993 will raise quality expectations for adhesives in medical devices, influencing product development. The 'Skill India' initiative will improve workforce training, ensuring better application knowledge and operational efficiency across various manufacturing sectors.
Market Segmentation Analysis
Each segment group is reviewed below, with the leader by share and the fastest grower by CAGR.
By Adhesive Strength – Low Strength Dominated, Medium Strength Expected to Grow Fastest
According to Vasudha, AM at 6Wresearch, in 2025, Low Strength led the adhesive strength split with a 40% share. Low strength threadlockers are extensively used in non-critical applications, particularly in consumer electronics where disassembly is necessary. Their significant market share stems from their essential role in securing components in devices like smartphones and appliances. Medium Strength is projected to grow fastest, at a CAGR of 8.2% during 2026–2032. Medium strength threadlockers are experiencing rapid growth due to their increasing use in general assembly applications across multiple sectors, notably automotive. With the automotive industry producing 22.7 million vehicles in 2021, the demand for reliable fastening solutions is on the rise. Suppliers should focus on enhancing their medium strength product offerings to meet the growing demand in assembly applications.
By Curing Method – Anaerobic Dominated, Heat-Resistant Expected to Grow Fastest
Anaerobic accounted for a 36% market share by curing method in 2025. Anaerobic curing methods are the leading choice for threadlockers as they provide effective bonding in the absence of air. This method is crucial across various sectors, especially automotive and electronics, where secure fastening is vital. The quickest growth will come from Heat-Resistant, forecast to expand at a CAGR of 8.3% between 2026 and 2032. Heat-resistant threadlockers are set for rapid growth due to their suitability for high-temperature applications, particularly in automotive engines. The anticipated 10% CAGR in the automotive sector from 2023 to 2028 will further boost the demand for these solutions. Manufacturers should prioritise the development of heat-resistant formulations to address the increasing requirements of high-temperature applications.
By Thread Size Suitability – Small Screws Dominated, General Assembly Expected to Grow Fastest
The largest thread size suitability category in 2025 was Small Screws, with a 40% share of total revenue. Small screws dominate the market, largely due to their critical function in securing components within electronic devices. Their extensive application in the electronics sector, which is projected to reach $300 billion by 2026, reinforces their strong market position. Over 2026–2032, General Assembly is expected to post the fastest growth, at a CAGR of 9.6%. General assembly applications are witnessing the fastest growth as they are utilised across a wide range of industries, including automotive and consumer goods. The complexity of modern assembly processes drives the need for versatile adhesive solutions that accommodate various thread sizes. Suppliers should consider diversifying their product lines to address the growing needs of general assembly applications across multiple sectors.
By End User – Electronics Industry Dominated, Automotive Assemblers Expected to Grow Fastest
Electronics Industry took a 37% share of end user in 2025, more than any other category. The electronics industry commands the largest market share for threadlocker adhesives, as they are vital for securing components in devices ranging from smartphones to appliances. This sector's growth aligns with the projected expansion of the electronics market to $300 billion by 2026. Automotive Assemblers are set to record the highest CAGR in this split, 8.4% over 2026–2032. Automotive assemblers represent the fastest-growing end user segment, driven by the increasing production of vehicles and the necessity for secure fastening in assembly lines. The automotive aftermarket's anticipated growth to $18 billion by 2026 further fuels this demand for reliable adhesive solutions. Suppliers should prioritise partnerships with automotive assemblers to capitalise on the expanding market opportunities in vehicle production.
Key Attractiveness of the Report
- 10 Years of Market Numbers
- Historical Data Starting from 2022 to 2025
- Base Year 2025
- Forecast Data until 2032
- Key Performance Indicators Impacting the Market
- Major Upcoming Developments and Projects
Key Highlights of the Report:
- India Threadlocker Adhesives Market Outlook
- Market Size of India Threadlocker Adhesives Market, 2025
- Forecast of India Threadlocker Adhesives Market, 2032
- Historical Data and Forecast of India Threadlocker Adhesives Revenues & Volume for the Period 2022 - 2032F
- India Threadlocker Adhesives Market Trend Evolution
- India Threadlocker Adhesives Market Drivers and Challenges
- India Threadlocker Adhesives Price Trends
- India Threadlocker Adhesives Porter's Five Forces
- India Threadlocker Adhesives Industry Life Cycle
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Adhesive Strength for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Low Strength for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Medium Strength for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By High Strength for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Oil Tolerant for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Curing Method for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Anaerobic for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Heat-Resistant for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Vibration-Resistant for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Surface-Insensitive for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Thread Size Suitability for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Small Screws for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By General Assembly for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Heavy Machinery Bolts for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Greased Threads for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By End User for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Electronics Industry for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Automotive Assemblers for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Industrial Equipment Makers for the Period 2022 - 2032F
- Historical Data and Forecast of India Threadlocker Adhesives Market Revenues & Volume By Maintenance Services for the Period 2022 - 2032F
- India Threadlocker Adhesives Import Export Trade Statistics
- Market Opportunity Assessment By Adhesive Strength
- Market Opportunity Assessment By Curing Method
- Market Opportunity Assessment By Thread Size Suitability
- Market Opportunity Assessment By End User
- India Threadlocker Adhesives Top Companies Market Share
- India Threadlocker Adhesives Competitive Benchmarking By Technical and Operational Parameters
- India Threadlocker Adhesives Company Profiles
- India Threadlocker Adhesives Key Strategic Recommendations
Market Covered
Segments analysed in this report are listed below.
By Adhesive Strength
- Low Strength
- Medium Strength
- High Strength
- Oil Tolerant
By Curing Method
- Anaerobic
- Heat-Resistant
- Vibration-Resistant
- Surface-Insensitive
By Thread Size Suitability
- Small Screws
- General Assembly
- Heavy Machinery Bolts
- Greased Threads
By End User
- Electronics Industry
- Automotive Assemblers
- Industrial Equipment Makers
- Maintenance Services
